
Wilson Combat Stainless Magazines
Wilson Combat Stainless
Magazines Wilson Combat has been supplying serious shooters and professionals with the
worlds most reliable and durable .45 auto magazines for the past 17 years. They are used
by the worlds most elite SPEC OPS unit, FBI SWAT, THUNDER RANCH and Professionals
worldwide. NO other .45 magazine on the market can compare for proven inherent
reliability, durability and the ability to remain fully loaded for long periods of time
without damage. Although, after 17 years the original product has an enviable reputation
for unequalled feeding reliability, we have learned how to make them even better. Now weve
made the best even better with the following improvements: More direct line feeding into
the chamber and improved feed lip design to allow more versatility in your choice of
ammunition and improve functioning in marginal spec pistols. Springs are specially
fabricated from the highest tensile strength heavy duty spring wire for enhanced feeding
and slide stop operation. This special wire also reduces spring set for the
longest service life possible. Weve also made them easier to fully seat into the
magazine well. Of course weve continued to use .027 (the thickest in the
industry) aircraft grade certified 17-7 PH stainless steel and heat treat them for maximum
durability and service life. As before the dimensional tolerances are held so close that
you will never encounter a Wilson mag that doesnt drop free from your pistol or that
your rounds are tight inside the tube as long as your pistol and ammo are close to proper
spec. Weve beefed up the stop on the front of our 10rd mags to eliminate
breakage and the new version seems to feed any bullet style you put in it 100%. As an
added bonus weve been able to maintain our 97 prices on the entire line of
premium stainless .45 magazines. Check out these important features:

Its really hard to improve on the BEST, BUT WEVE
DONE IT! Our NEW .45 magazines are so inherently reliable theyll make virtually ANY
1911 pistol function EVERYTIME, including YOURS!
8 Rds
$30.00
10 Rds.
$35.00
#5 Glue-On Base PadsA Glue-On Base Pad increases your stock magazines length by .360 inches to provide positive seating without getting too long for practical use. The key to installing glue-on base pads is to roughen and degrease all contact surfaces prior to gluing. |
![]() |
|
Apply a thin film of quality
contact cement (we use Barge cement) to both surfaces, let it dry, then firmly press the
base pad onto the magazine. Properly installed, the base pad will stay on forever.
|
||